REF. 8515 PLAQUITA INTERCAMBIABLE TORNEADO DCGT 55º POSITIVA ALUMINIO
- Rompevirutas para trabajos de acabado/semi-desbaste/desbaste
- Gama de calidades / grados de recubrimiento según metodos PVD (P-620) o sin recubrir (P-010)
- Geometría 55º
- Ángulo de incidencia 7º
Ángulo Incidencia: 7º
Tipo: DCGT
Tipo Filo Corte: Filo Agudo
Uso: Torneado
Operación: Torneado
Tipo Herramienta: Plaquitas
Referencias
| Referencia | Calidad x Rompevirutas | ISO | Circulo Inscrito | Diámetro Agujero | Espesor Plaquita | Longitud Filo Corte | Profundidad de Corte | Radio Vértice | Tipo Torneado | Avance Plaquita | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 29901 | P-720 x ZNF | DCGT-070202-E-ZNF | 6.35mm | 2.8mm | 2.38mm | 7.8mm | 0.10-1.50 | 0.2mm | INOX | 0.02-0.12 | consultar |
| 29902 | P-010 x ZAL | DCGT-070202-F-ZAL | 6.35mm | 2.8mm | 2.38mm | 7.8mm | 0.10-1.50 | 0.2mm | Aluminio | 0.02-0.12 | consultar |
| 29905 | P-720 x ZNF | DCGT-070204-E-ZNF | 6.35mm | 2.8mm | 2.38mm | 7.8mm | 0.10-4.00 | 0.4mm | INOX | 0.10-0.20 | consultar |
| 29903 | P-010 x ZAL | DCGT-070204-F-ZAL | 6.35mm | 2.8mm | 2.38mm | 7.8mm | 0.10-4.00 | 0.4mm | Aluminio | 0.10-0.20 | consultar |
| 29908 | P-720 x ZNF | DCGT-11T302-E-ZNF | 9.52mm | 4.4mm | 3.97mm | 11.6mm | 0.05-4.00 | 0.2mm | INOX | 0.05-0.12 | consultar |
| 29906 | P-010 x ZAL | DCGT-11T302-F-ZAL | 9.52mm | 4.4mm | 3.97mm | 11.6mm | 0.05-4.00 | 0.2mm | Aluminio | 0.05-0.12 | consultar |
| 29911 | P-720 x ZNF | DCGT-11T304-E-ZNF | 9.52mm | 4.4mm | 3.97mm | 11.6mm | 0.10-5.00 | 0.4mm | INOX | 0.10-0.22 | consultar |
| 29910 | P-010 x ZAL | DCGT-11T304-F-ZAL | 9.52mm | 4.4mm | 3.97mm | 11.6mm | 0.10-5.00 | 0.4mm | Aluminio | 0.10-0.22 | consultar |
Documentos PDF